å
Fill the holes in the UPRIGHTS (D and E) 1/4 to 1/2 full
with GLUE (G1) as shown.
å
Fasten the MODESTY PANEL (B) to the UPRIGHTS (D and
E). Use four BLACK 2" FLAT HEAD SCREWS (S1).
å
NOTE: Be sure the DOWELS in the ends of the MODESTY
PANEL insert into the UPRIGHTS. Wipe away the excess glue.
Step 11
B
D
E
Page 15
www.sauder.com402159
Notch
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely di cult.
Caution
!
BLACK 2" FLAT HEAD SCREW
(4 used in this step)
S1
G1
G1
Surface
with holes
To Next Page
Loading...
