Sauder 402375 - Page 9

å
Fasten six ANGLE BRACKETS (LL) to the ENDS (A2 and B),
UPRIGHTS (C2 and D2), and BOTTOMS (G2 and H). Use six
BLACK 9/16" LARGE HEAD SCREWS (DDD).
å
NOTE: Be sure the edges of the ANGLE BRACKETS are even
with the edges of the ENDS, UPRIGHTS, and BOTTOMS.
å
Fasten the BASES (V2 and W) to the ENDS (A2 and B),
UPRIGHTS (C2 and D2), and BOTTOMS (G2 and H). Use six
BLACK 9/16" LARGE HEAD SCREWS (DDD).
Step 4
402375www.sauder.com/services
Page 9
A2
C2 G2
D2
B
H
W
V2
LL
LL
LL
BLACK 9/16" LARGE HEAD SCREW
(12 used in this step)
DDD