Sauder 408761 - Page 16

Step 12
å
Insert the SLIDE CAMS (GG) into the large holes in the
LARGE DRAWER SIDES (D14 and D15).
å
Fasten the EXTENSION SLIDES (Z) to the LARGE
DRAWER SIDES (D14 and D15). Use four GOLD 5/16"
FLAT HEAD SCREWS (QQ) through holes #1 and #3.
å
NOTE: The screw head in the CAM must be visible
through the slotted hole in the SLIDE.
408761 www.sauder.com/servicesPage 16
Open end
1
2
3
Open end
1
2
3
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
Z
Z
GG
GG
D14
D15
GOLD 5/16" FLAT HEAD SCREW
(4 used in this step)
QQ