å
Fasten the UPRIGHTS (D and E) to the HUTCH TOP (G).
Tighten three TWIST-LOCK® FASTENERS.
Step 3
408761www.sauder.com/services
Page 7
How to use the SAUDER TWIST-LOCK
®
FASTENER
1. Insert the dowel end of the FASTENER into the hole of the
adjoining part.
NOTE: The dowel end of the FASTENER must remain fully
inserted in the hole of the adjoining part while locking
the FASTENER.
2. Tighten the FASTENER with a Phillips screwdriver as tight
as possible.
Dowel end
G
D
D
E
Curved edge
Unfi nished edge
Curved edge
Curved edge
To Next Page
Loading...
