Step 20
419119 www.sauder.com/servicesPage 24
å
Slide the ADJUSTABLE SHELF MOLDINGS* (V and W) onto the notched edges of the ADJUSTABLE SHELVES (N).
å
Then, fasten the CARD HOLDERS (35M) to the ADJUSTABLE SHELF MOLDINGS (V and W). Use four SILVER 5/8"
MACHINE SCREWS (15S).
å
*U.S. Patent No. 5,499,886
N
N
V
W
Notched edge
Slide the RIGHT
ADJUSTABLE SHELF
MOLDING (V) onto
the notched edge.
Slide the LEFT
ADJUSTABLE SHELF
MOLDING (W) onto
the notched edge.
This ADJUSTABLE SHELF (N) will now
be called the LEFT ADJUSTABLE SHELF.
This ADJUSTABLE SHELF (N) will now be
called the RIGHT ADJUSTABLE SHELF.
35M
SILVER 5/8" MACHINE SCREW
(4 used in this step)
15S
Open end
To Next Page
Loading...
