Sauder 419321 - Step 9: Attach Right End

å
Insert two METAL PINS (1R) into the holes in the RIGHT END (A).
å
Fasten the RIGHT END (A) to the TOP (E), LOWER PANEL (F),
and LOWER SHELF (H). Tighten six TWIST-LOCK® FASTENERS.
å
NOTE: Be sure the METAL PINS in the RIGHT END insert into
the holes in the UPPER SHELF (G).
Step 9
419321www.sauder.com/services
Page 13
A
E
F
G
H
J
Surface
without
TWIST-LOCK®
FASTENERS
1R