Sauder 420203 - Page 22

Step 18
å
Fasten the LARGE DRAWER SIDES (Q and R) to the
LARGE DRAWER BACK (S). Use four BLACK 1" FLAT
HEAD SCREWS (15).
å
Slide the LARGE DRAWER BOTTOM (T) into the grooves
in the LARGE DRAWER SIDES (Q and R) and LARGE
DRAWER BACK (S).
å
Fasten the EXTENSION SLIDES (4) to the LARGE
DRAWER SIDES (Q and R). Use four BLACK 1/2" FLAT
HEAD SCREWS (19).
Page 22 www.sauder.com 420203
Groove
BLACK 1" FLAT HEAD SCREW
(4 used in this step)
15
Q
R
S
Q
T
R
S
Finished surface
Q
R
4
BLACK 1/2" FLAT HEAD SCREW
(4 used for the SLIDES)
19
Use these holes.
4
4