Sauder 420203 - Page 24

Step 20
å
Fasten the DRAWER SIDES (U and V) to the DRAWER
BACK (W). Use four BLACK 1" FLAT HEAD SCREWS (15).
å
Insert two WOOD DOWELS (8) into the holes in the
DRAWER BACK (W).
å
Push the DRAWER BRACE (Y) onto the WOOD DOWELS
in the DRAWER BACK (W).
å
Slide the DRAWER BOTTOM (X) into the grooves in the
DRAWER SIDES (U and V) and DRAWER BACK (W).
Page 24 www.sauder.com 420203
BLACK 1" FLAT HEAD SCREW
(4 used in this step)
15
Groove
Groove
U
W
X
V
Y
Finished surface
8