Sauder 421952 - Page 18

Step 14
å
Fasten the LIFT TABLE MECHANISMS (23M) to the TOP (L).
Use six BLACK 9/16" LARGE HEAD SCREWS (1S).
å
NOTE: Be sure to position the LIFT TABLE MECHANISMS on
the TOP exactly as shown.
421952 www.sauder.com/servicePage 18
L
Surface with holes
23M
23M
BLACK 9/16" LARGE HEAD SCREW
(6 used in this step)
1S
This hole
must be here.
Meet Part (L). This component has
been engineered to be lighter, stronger,
faster… well ok. Not technically faster. But
defi nitely makes for a sturdier Lift-Top
Co ee Table that’s easier to assemble
and friendlier to the environment.