Step 1
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/service/tips
å
Assemble your unit on a carpeted fl oor or on the
empty carton to avoid scratching your unit or the fl oor.
å
To begin assembly, push a SAUDER TWIST-LOCK®
FASTENER (7F) into the large holes in the BACK
PANEL (C) and FRONT PANEL (K).
421952www.sauder.com/service
Page 5
Do not tighten the TWIST-LOCK® FASTENERS in this step.
7F
7F
C
K
To Next Page
Loading...
