Sauder 423033 - Step 12: Add Shelf Moldings

Step 12
å
Slide and center a SHELF MOLDING* (N) onto the
notched edge of one of the ADJUSTABLE SHELVES (J).
å
Repeat this step for the other ADJUSTABLE SHELVES (J).
å
* U.S. Patent No. 5,499,886
423033 www.sauder.com/servicesPage 16
J
Slide the SHELF
MOLDING (N) onto
the notched edge.
N
These surfaces
should be even.
The large groove is
closer to this edge.
Notched edge