Sauder 426930 - Step 6: Assemble Back Skirt Components; Attach Bracket and Insert Dowels for Back Skirt; Connect Back Skirt to Left End and Bottom

1
Step 6
å
Fasten one METAL BRACKET (6) to the BACK SKIRT (L)
exactly as shown. Use two 1/2" FLAT HEAD SCREWS (13).
å
Insert two WOOD DOWELS (1) into the holes in the
BACK SKIRT (L).
å
Fasten the BACK SKIRT (L) to the LEFT END (A). Use one
1-9/16" FLAT HEAD SCREW (11).
å
NOTE: Be sure the WOOD DOWEL in the BACK SKIRT
inserts into the LEFT END (A).
å
Fasten the BACK SKIRT (L) to the BOTTOM (G). Use
two 1/2" FLAT HEAD SCREWS (13) through the METAL
BRACKET and into the BOTTOM.
L
6
1
1/2" FLAT HEAD SCREW
(4 used for the METAL BRACKET)
13
A
G
L
13
1-9/16" FLAT HEAD SCREW
(1 used for the BACK SKIRT)
11
Page 10 www.sauder.com/service 426930