Step 1
Look for this icon. It means a video assembly tip is
available at www.sauder.com/service/tips
Find the numbered video or scan the QR code.
0
å
Assemble your unit on a carpeted floor or on the empty
carton to avoid scratching your unit or the floor.
å
Fasten a ROD HANGER (2) to the UPRIGHT (C). Use two
1/2" FLAT HEAD SCREWS (13).
1/2" FLAT HEAD SCREW
(2 used in this step)
13
C
2
Surface with fewer holes
Page 5www.sauder.com/service426930
To Next Page
Loading...
