Sauder 426930 - Step 2: Connect Top and Bottom Panels; Connect Top and Bottom to Upright

å
Fasten the TOP (F) and BOTTOM (G) to the UPRIGHT (C).
Use four 1-9/16" FLAT HEAD SCREWS (11).
Step 2
C
F
G
11
Surface with
more holes
Unfinished edge
Hole on other surface
should be here.
1-9/16" FLAT HEAD SCREW
(4 used in this step)
11
Page 6 www.sauder.com/service 426930
Just think. The sooner
you do this, the sooner
you do something else.