Step
å
1
st
- With your pencil, strike a mark through the center of the hole in the SAFETY STRAP.
å
2
nd
- Drill a 3/8" hole on the mark.
å
3
rd
- While you squeeze the wings together, gently tap the WALL ANCHOR from the FURNITURE TIPPING RESTRAINT
KIT (96) into the hole until it is even with the surface of the wall.
å
4
th
- Turn the LONG SCREW through the hole in the SAFETY STRAP and into the WALL ANCHOR.
å
NOTE: You will need to turn the LONG SCREW multiple turns to completely tighten and secure your unit to the wall.
Step 13
4
th
96
1
st
Electric drill with 3/8" bit
2
nd
3
rd
Mark and drill
a 3/8" hole
into the wall.
FRONT
Page 17www.sauder.com429430 / 168-0094-8
To Next Page
Loading...
