Sauder Carson Forge 412920 - Page 26

Step 19
Page 26
D574
M71
1
3
2
4
å
Fasten the PENCIL DRAWER SIDES (D113) and
DRAWER BRACE (M71) to one of the PENCIL DRAWER
BOX FRONTS (D574). Use fi ve BLACK 1-9/16" FLAT
HEAD SCREWS (30S).
å
Slide the LARGE DRAWER BOTTOM (B59) into the
grooves in the PENCIL DRAWER SIDES (D113) and
PENCIL DRAWER BOX FRONT (D574).
å
Fasten the remaining PENCIL DRAWER BOX
FRONT (D574) to the PENCIL DRAWER SIDES (D113)
and DRAWER BRACE (M71).
Use fi ve BLACK 1-9/16" FLAT
HEAD SCREWS (30S).
å
Fasten the PENCIL DRAWER FRONT (R3) to the PENCIL
DRAWER BOX FRONT (D574). Use three BLACK 7/8"
L
ARGE HEAD SCREWS (17S).
Be sure the DRAWER
BOTTOM inserts into the
DRAWER BOX groove.
With the palm of your hand,
tap the DRAWER BOTTOM
down into the groove.
Unfi nished surface
B59
Groove
Be sure the
DRAWER
BOTTOM
inserts into
the DRAWER
BOX groove.
BLACK 1-9/16" FLAT HEAD SCREW
(10 used in this step)
30S
D574
D113
D113
M71
Surface without hole
D113
D113
D574
D113
D113
30S
D574
R3
BLACK 7/8" LARGE HEAD SCREW
(3 used for the DRAWER FRONT)
17S
Hidden part using
recycled material.
Color may vary.
Start each screw a few
turns before completely
tightening any of them.