Sauder Carson Forge Armoire - Page 14

å
Fill the holes in the ENDS (A2 and B2) 1/4 to 1/2 full with GLUE (54M). Then, insert
a WOOD DOWEL (15F) into these holes. Wipe away the excess GLUE.
å
Fill the lare holes in the FEET (I and J) 1/4 to 1/2 full with GLUE (54M). Quickly, fl ip
the FEET over and insert the WOOD DOWELS (15F) in the ENDS into the holes in
the FEET. Wipe away the excess GLUE.
å
Fasten the FEET (I and J) to the ENDS (A2 and B2). Use four BLACK 9/16" LARGE
HEAD SCREWS (1S) throuh the CORNER BRACKETS (31G) and into the FEET.
å
Fasten the SKIRT (G) to the BOTTOM (D). Use two BLACK 9/16" LARGE HEAD
SCREWS (1S) throuh the METAL BRACKETS and into the SKIRT.
Step 9
Fill the holes 1/4 to 1/2 full with GLUE.
B2
A2
D
G
I
J
54M
54M
15F
31G
31G
415107 www.sauder.com/servicesPae 14
Inspect the parts thorouhly before
assemblin. Disassembly of lued parts
is extremely di cult.
Caution
!
BLACK 9/16" LARGE HEAD SCREW
(6 used in this step)
1S