Sauder Carson Forge Series - Sauder Mirror Assembly Steps; Step 1: Prepare and Insert Cams

Step 1
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
å
Assemble your unit on a carpeted fl oor or on the empty
carton to avoid scratching your unit or the fl oor.
å
Push eight HIDDEN CAMS into the RAILS (B and C).
415556 www.sauder.com/servicesPage 4 415556 www.sauder.com/servicesPage 4
Arrow
1F
Arrow
The arrow in the HIDDEN
CAM must point toward the
hole in the edge of the board.
Hole
B
C
B
C
(8 used)