Sauder Harbor View 417586 - Page 54

å
IMPORTANT: The WIRELESS CHARGING SPOT STICKER
must be placed directly above the CHARGER.
å
Cut out the STICKER TEMPLATE if you have not done
so already.
å
First, use masking tape to fasten the sticker template
edges to the corners of the TOP (G3 or H3) as shown.
Then, center the STICKER over the cut-out hole and stick
it to the TOP.
Step 45 Optional Hidden Wireless Qi Compatibile Charger by Eggtronic (sold separately)
Center the STICKER inside
the cut-out hole in the
LEFT STICKER TEMPLATE.
G3
H3
Center the STICKER inside
the cut-out hole in the
RIGHT STICKER TEMPLATE.
STOP
The STICKER
must be placed
directly above the
CHARGER.
417586 www.sauder.com/servicePage 54