Sauder HomePlus 411591 - Page 8

å
Fasten the TOP MOLDING (J) to the TOP (C). Tighten three
TWIST-LOCK® FASTENERS.
å
Slip a LARGE RUBBER SLEEVE (59G) over the TIE PLATE (3G).
The RUBBER SLEEVE will be a tight fi t.
å
Then, fasten the TIE PLATE (3G) to the TOP MOLDING (J). Use
a BLACK 9/16" LARGE HEAD SCREW (1S).
Step 4
411591 www.sauder.com/servicesPage 8
J
C
3G
59G
Wide edge
BLACK 9/16" LARGE HEAD SCREW
(1 used for the TIE PLATE)
1S