Step 1
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
å
Assemble your unit on a carpeted fl oor or on the empty
carton to avoid scratching your unit or the fl oor.
å
To begin assembly, push a SAUDER TWIST-LOCK®
FASTENER (12F) into the large holes in the BACKS (H and J).
Do not tighten the TWIST-LOCK® FASTENERS in this step.
(4 used)
12F
H
J
J
424128 www.sauder.com/servicesPage 6
To Next Page