Need help?Do you have a question about the sauermann SI-1801 and is the answer not in the manual?
Connect the pump to the mains network according to local wiring rules.
Connect the safety switch to the mains or class 2 circuit to prevent condensate overflow.
Install the pump horizontally and connect the condensate drain pipe and discharge tube.
Install the pump on the ground, wall, or ceiling, ensuring ventilation and proper tubing.
Pour water to check pump start/stop and test the safety switch operation.
Disconnect power, clean the tank with a mild solution, and check the float.
Check for frozen/obstructed lines, blocked check valve, damaged valve, or wiring/power issues.
General| Brand | sauermann |
|---|---|
| Model | SI-1801 |
| Category | Water Pump |
| Language | English |
To Next Page
