Need help?Do you have a question about the sauermann Si-82 Series and is the answer not in the manual?
Table detailing flow rates based on discharge head and tubing length.
Connects the pump to the mains network in accordance with local wiring rules.
Details for connecting the high-level safety switch, specifying NC contact and voltage ratings.
Guides on connecting inlet and discharge pipes, including tubing sizes and adapters.
Instructions for mounting the pump horizontally, choosing exit side, and ventilation.
Steps to check pump start/stop functionality and safety switch operation.
Procedure for disconnecting power, cleaning the pump tank with a mild solution.
General| Pump Type | Centrifugal |
|---|---|
| Maximum Flow Rate | 500 L/h |
| Maximum Discharge Head | 5 m |
| Power Supply | 230 V AC, 50/60 Hz |
| Power Consumption | 60 W |
| Protection | IPX4 |
| Flow Rate | 500 L/h |
| Maximum Head | 5 m |
| Detection | Integrated float switch |
| Safety switch | NC |
| Standards | CE |
| Application | For air conditioning and refrigeration systems |
To Next Page
