Need help?Do you have a question about the sauermann Si-82 and is the answer not in the manual?
Provides technical details for specific Sauermann pump models including supply, safety, flow, and dimensions.
Details technical specifications for alternate Sauermann pump models, covering electrical, performance, and environmental parameters.
Highlights pump usage limitations, indoor use requirement, and ambient temperature considerations.
Warns about the risk of electric shock and emphasizes proper grounding of the pump.
Connects the pump's cable to the mains network following local wiring rules for safe operation.
Explains the connection of high-level safety switches for EU and USA models, noting voltage and contact type.
Details how to connect the condensate drain pipe and discharge tubing to the pump unit.
Covers pump placement, mounting options, water exit side selection, and ventilation requirements.
Instructions on initial pump operation, checking start/stop functionality and safety switch engagement.
Details the procedure for cleaning the pump's interior, including safety precautions and required materials.
Checks for issues like removed red tabs, frozen lines, or blocked check valves if the pump runs non-stop.
Guides on diagnosing quick on/off cycles or a pump that fails to start, checking check valves and wiring.
Details the 24-month warranty period, coverage for manufacturer defects, and exclusions for labor or indirect damages.
General| Pump Type | Centrifugal |
|---|---|
| Maximum Flow Rate | 500 L/h |
| Maximum Head | 5 m |
| Power Supply | 230V AC |
| Power Consumption | 60 W |
| Thermal Protection | Yes |
| Flow Rate | 500 L/h |
| Protection Class | IP20 |
To Next Page