POINTS TO CHECK BEFORE STARTING WORK
• Check whether any screws, nuts and installation elements are loose. Tighten
any loose screws.
• Check whether the air filter is dirty. Prior to starting work, remove all dirt from
the air filter.
• Make sure that the plastic head guard and the blade is securely fastened in
place.
• Check the fuel tank for leaks.
• Check the blade or the string trimmer head for damage.
STARTING THE BRUSH CUTTER
WARNING!
• Prior to starting the engine, make sure that the cutting blade/string trimmer
head can move freely and is not touching any foreign objects.
•
• When the engine is idling, the cutting tool must not be turning.
Otherwise, contact an authorized service centre to perform an inspection
and remedy the problem.
• Prior to starting the engine, make sure that the throttle trigger moves freely.
ATTENTION: Hold the brush cutter firmly with both hands. Always stand so that your
body is on the left of the shaft tube. Never hold the handle with crossed arms. These
instructions also apply to left-handers.
To Next Page
Loading...