MAINTENANCE AND STORAGE
MAINTENANCE AND STORAGE
• Before every use
– Check that all nuts and bolts are tightened.
– Check that no fuel is leaking from the fuel tank.
– Lubricate the gearbox with grease.
• After every 20 hours of operation (For this purpose we recommend you contact
an authorised service centre):
– Clean the air filter.
– Clean the fuel filter.
• After every 50 hours of operation (For this purpose we recommend you contact
an authorized service centre):
– Clean the spark plug and adjust the gap between the electrodes to a distance of
0.6–0.7 mm.
– Clean out deposits from the exhaust and muffler.
– Disconnect the shaft and lubricate with quality lubricant.
• Check the installation after performing maintenance and check that all nuts and
bolts are pulled tight.
SERVICE
• In the event that after purchasing the product you find any kind of defect,
contact the service department. When using the product, follow the
instructions contained in the included user’s manual.
• A complaint will not be accepted if you modified the product or if you did not
follow the instructions in the user’s manual.
To Next Page
Loading...