Saurium YR-BC430 - Disposal Procedures; Packaging Material Disposal

THE MOTOR STARTS
AND DIES IMMEDIATELY
Possible cause
Remedy
1. Check the fuel.
• Fuel ran out.
• Add fuel.
• The fuel contains water.
• Drain the fuel tank and
carburettor.
• Fill the fuel tank with
new fuel.
• Incorrect ratio of the fuel
mix.
2. Remove and check
the spark plug.
• Faulty or dirty spark plug.
• Replace the spark plug.
• Incorrect gap between
the electrodes.
3. Check the air filter.
• Dirty the air filter.
Clogged air filter.
• Clean or replace the air
filter insert.
4. Take the motor to a
qualified service
centre or to the
vendor.
• Clogged air bleed valve.
• Replace or repair the
faulty parts.
• Clogged air bleed valve.
Replace or repair the
faulty parts.
DISPOSAL
INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED
PACKAGING
Dispose of used packaging material at a site designated for waste in your
municipality.
The machine and its accessories are manufactured from various materials,
e.g. metal and plastic.
Take damaged parts to a recycling centre. Inquire at the relevant
government department.
This product meets all the basic requirements of EU directives that apply to
it.