10 | en FH-BA-e-2430
4 Basic information (general)
4.1 General information on warning notices
Warnings are used in these operating instructions to warn you of possible personal
injury or damage to property in certain situations.
Signal word Description of the
DANGER Failure to observe the instructions will lead directly to
serious injury, permanent impairment (e.g. loss of a limb)
or death of the user or third parties
WARNING
Failure to observe the instructions may result in serious
injury, permanent impairment (e.g. loss of a limb) or death
of the user or third parties
CAUTION Failure to observe the instructions may result in minor
injuries or temporary damage to the user or third parties
(e.g. minor cuts)
NOTE Failure to observe the instructions may result in damage
to property
Symbols in warning notices :
Symbol Meaning
Warning signs
Warning signs warn you of dangers that may lead to
personal injury. The symbol indicates the type of hazard.
Indicates general hazards or a danger point
Warning of electrical voltage
Warning of flammable substances
Warning of explosive substances
4.2 Intended use
Only use the device to measure tensile and compressive forces within the measuring
ranges specified in the technical data.
To use the device as intended, only use accessories or spare parts tested by SAUTER.
SAUTER offers optional software and accessories to make the measuring device more
versatile in use. Please ask SAUTER or the SAUTER supplier for more information or
visit our website www.sauter.eu
To Next Page
Loading...
