FH-BA-e-2430 en | 11
4.3 Improper use
Do not use the measuring device for medical weighing.
If small quantities of the material to be measured are removed or added, incorrect
measurement results may be displayed due to the "stability compensation" in the
measuring device! (Example: Liquids flowing slowly out of a container suspended from
the measuring cell).
Do not apply a continuous load to the measuring device with external measuring cell.
Do not use the device in potentially explosive atmospheres or for measurements in
liquids or on live parts.
Unauthorised structural changes, additions or conversions to the appliance are
prohibited.
4.4 Guarantee
Warranty expires with
Non-compliance with our specifications in the operating instructions
Use outside the described applications
Modifying or opening the device
Mechanical damage and damage caused by media, liquids, natural wear and tear
Improper set-up or electrical installation
Overload of the measuring unit
Improper assembly or electrical installation
Overloading the measuring cell
To Next Page
Loading...
