12 | en FH-BA-e-2430
5 Basic warnings and safety instructions
1.1 Observe the notes in the operating instructions
Read the operating instructions carefully before commissioning/using the
appliance, even if you already have experience with SAUTER appliances.
Always keep the instructions in the immediate vicinity of the appliance.
1.2 Staff training
The appliance may only be used by persons who have read and understood the
operating instructions, in particular the chapter on safety.
1.3 Security
Incorrectly performed force measurements can lead to serious injury to persons and
damage to objects and must therefore only be carried out by trained and experienced
personnel.
In particular, it must be avoided that forces act on the purchased measuring device
that exceed the maximum device load (Max) or do not act axially on the device via the
external load cell; or if high impulse forces act on the measuring device.
Avoid twisting the load cell, otherwise it could be damaged and the measuring accuracy
will be reduced in any case.
Please prevent the measuring device from being overloaded beyond the specified
maximum load (Max), minus any existing tare load. This can damage the measuring
device (risk of breakage!).
⚠ WARNING
Read all safety information and instructions.
Failure to observe the safety information and instructions may
result in electric shock, fire and/or serious injury.
Keep all safety information and instructions for future
reference.
● Make sure that there are never people or objects under the
load, as they could be injured or damaged!
● The design of the measuring device must not be modified.
This can lead to incorrect measurement results, safety-related
defects and the destruction of the measuring device
To Next Page
Loading...
