System Overview
The Savant® Wireless Thermostat (SST-W100) is a Wi-Fi enabled digital thermostat designed to control Heating,
Ventilation and Air Conditioning (HVAC) systems. The SST-W100 communicates wirelessly over Wi-Fi to a Savant
System. The SST-W100 is designed to integrate seamlessly into a Savant controlled environment with RacePoint
Blueprint™.
This document is written for the end user and assumes that the Installer has completed the following:
•
Installed and wired the SST-W100 thermostat
•
Installed and configured the remote sensors (SST-TEMP1)
•
Programmed the SST-W100 for the correct HVAC system type
•
Configured the Wi-Fi network
•
Configured the SST-W100 and TrueControl™ using RacePoint Blueprint™
Outside
Temperature
Relative
Humidity
Setpoints
Warmer (Up)
Cooler (Down)
Menu
System Status
Room
Temperature
Heating/Cooling
Mode Selection
Fan Mode Selection
Run/Hold
Mode Selection
Time
Backlite
Display
Connection
Status Field
Front View of SST-W100
061313 009-0957-00
3 of 17
Savant Wireless Thermostat (SST-W100) User Guide
To Next Page
