To Next PageTo Next Page
Need help?Do you have a question about the Scag Power Equipment STC48A-19KA and is the answer not in the manual?
General| Engine Manufacturer | Kawasaki |
|---|---|
| Engine Model | FS600V |
| Cutting Width | 48 inches |
| Engine Brand | Kawasaki |
| Engine Power | 19 HP |
| Cylinders | 2 |
| Displacement | 603 cc |
| Cutting Height Range | 1.5 - 4.5 inches |
| Transmission Type | Hydrostatic |
| Weight | 730 lb |
| Wheel Size - Rear | 20 x 10-8 |
| Engine | Kawasaki |
| Deck Material | Steel |
| Speed Range | 0 - 8 mph |
| Wheel Size - Front | 13 x 5 inches |
Explains hazard indicators like DANGER, WARNING, CAUTION and general safety principles.
Details crucial checks and practices before mower operation.
Details crucial practices during mower operation.
Identifies all controls, instruments, and explains the safety interlock system.
Covers engine starting procedures and how to operate the drive and steering controls.
Outlines recommended service intervals and grease points for the mower.
