7. VISUALISATION OF A/D CONVERTER POINTS
- Turn off the power, empty the pan, hold the OFF/ON key and the TARE key together until, display
will show “88888” at this point will be necessary to release the OFF/ON key;
- When the display will show “F1 CAL”, release also the TARE key;
- Press TARE key, display will show “F2 INP”;
- Press ZERO key to confirm;
- The instrument shows the A/D converter points relative to the weight on the scale.
- Press ZERO to exit the step.
- Press ON/OFF to exit setup.
To Next Page
Loading...
