Need help?Do you have a question about the ScaleTrains GE ES44 and is the answer not in the manual?
Details about the real-world GE AC4400 locomotive, its design history, and features.
General advice on safe operation and movement of the model.
Specific steps for safely unboxing the locomotive.
Guidance on proper orientation and care when storing the model.
Instructions on how to take the locomotive apart.
Procedures for maintaining the model's appearance.
Advice on appropriate lubricants and application points for the model.
Operation specifics for non-sound models on DC power.
Operation specifics for sound models on DC power.
Initial steps for operating the locomotive using DCC.
How DIP switches affect DCC lighting and features.
Methods for adjusting master and individual sound volumes.
Controls directional headlights, dimmable via F12.
Simulates dynamic brake operation, idling non-equipped locos.
Manages Distributed Power Unit lights for rear-of-train indication.
Controls front/rear ditch lights, flasher options available.
Locks speed step while allowing sound changes.
Activates braking function to stop the locomotive.
Reduces headlight brightness and turns off ditch lights.
Toggles number board lights off, useful for trailing units.
Automatic lighting that activates with startup/shutdown.
Energy storage for brief power interruptions.
Procedure for programming high CVs on older DCC systems.
Sets the minimum speed at throttle step 1.
Adjusts the time taken to reach maximum speed.
Adjusts the time taken to stop from maximum speed.
Sets the maximum speed the locomotive can achieve.
Sets the speed at the midpoint of the throttle range.
Configuring the high byte for long DCC addresses.
Configuring the low byte for long DCC addresses.
Step-by-step guide for manual long address programming.
Allows selection of different horn sound options.
Allows selection of different bell sound options.
Controls the duration the bell rings after the horn.
Details about the real-world GE AC4400 locomotive, its design history, and features.
General advice on safe operation and movement of the model.
Specific steps for safely unboxing the locomotive.
Guidance on proper orientation and care when storing the model.
Instructions on how to take the locomotive apart.
Procedures for maintaining the model's appearance.
Advice on appropriate lubricants and application points for the model.
Operation specifics for non-sound models on DC power.
Operation specifics for sound models on DC power.
Initial steps for operating the locomotive using DCC.
How DIP switches affect DCC lighting and features.
Methods for adjusting master and individual sound volumes.
Controls directional headlights, dimmable via F12.
Simulates dynamic brake operation, idling non-equipped locos.
Manages Distributed Power Unit lights for rear-of-train indication.
Controls front/rear ditch lights, flasher options available.
Locks speed step while allowing sound changes.
Activates braking function to stop the locomotive.
Reduces headlight brightness and turns off ditch lights.
Toggles number board lights off, useful for trailing units.
Automatic lighting that activates with startup/shutdown.
Energy storage for brief power interruptions.
Procedure for programming high CVs on older DCC systems.
Sets the minimum speed at throttle step 1.
Adjusts the time taken to reach maximum speed.
Adjusts the time taken to stop from maximum speed.
Sets the maximum speed the locomotive can achieve.
Sets the speed at the midpoint of the throttle range.
Configuring the high byte for long DCC addresses.
Configuring the low byte for long DCC addresses.
Step-by-step guide for manual long address programming.
Allows selection of different horn sound options.
Allows selection of different bell sound options.
Controls the duration the bell rings after the horn.
General| Brand | ScaleTrains |
|---|---|
| Model | GE ES44 |
| Category | Toy |
| Language | English |
To Next Page