SCAN 58 - series - Default Chapter; Table of Contents

2
CONTENTS
Table of contents
Technical data .............................................................................................. 3
Installation
Safety
Technical data and dimensions
Dimension sketch for Scan 58 - series
Type plate
Assembly ...................................................................................................... 10
Transport brackets
Service box
Additional accessories
Positioning your wood-burning stove
Positioning near to non-flammable materials
Distance to furniture
Diatance to fl ammable walls
Product registration number
Adjusting screws
Load bearing foundation
Floor plate
Existing chimney and pre-fabricated element chimney
Connection between stove and steel chimney
Requirements for chimney
Connection with 90° elbow pipe
Fitting the stove onto the plinth
Fresh air intake
Closed combustion system
Connecting piece top outlet
Preparing the stove for rear outlet
Wall-hung model
Fitting the Scan 58 wall-hung model
Scan 58-9 and Scan 58-10
Scan 58-9 and Scan 58-10 with high top
Accessories .................................................................................................. 20
Mounting of high top for Scan 58-7 and Scan 58-8
Wall mounting kit for Scan 58 with high top
Heat accumulating stones for high top
Fitting the soapstone top
Fitting a storage door
Instruction for use ................................................................................... 26
CB technique
Primary air
Secondary air
Baffl e plates
Ash drawer
Handle for riddling grate
Instructions for heating ......................................................................... 27
Lighting
Handling fuel
Maintenance .............................................................................................. 29
Troubleshooting ........................................................................................ 31