SCAN DSA 10 - Assembly; Unpacking; Service Package; Type Plate

ASSEMBLY
5
Unpacking
To protect your stove, we recommend not removing the plastic packaging from the stove until you have completed the assembly.
Service package
The service package contains the following:
• Fitting for flue collar (not required for this stove)
• Seal for flue collar (not required for this stove)
• Safety fitting (not required for this stove)
• Plastic plugs for transport safety hole at the bottom of the stove (not required for this stove)
• Various tools
• Glove
• Fire starters for first lighting
Type plate
All Scan wood-burning stoves are fitted with a type plate, that specifies the approval standards and the distance to flammable materials.
Scan DSA 10
Freestanding room heater fired by solid fuel
Standard:
Fuel type:
Operation type:
The appliance can be operated in a shared flue.
Country
EN 13240 EC no. 90081600
Wood
Intermittent
EUR
Norway
Classification
Intermittent
Klasse 2
Certificate/Standard
EN 13240
SINTEF 110-0262
Approved by
RWE Power AG
SINTEF - NBL
Dust CO emission at 13% O2: 29 mg/Nm³
Flue gas temperature: 270°C
Nominal heat output: 8 kW
Efficiency: 81%
Scan A/S DK 5492 Vissenbjerg
Minimum distance to combustible materials:
Side: 550 mm - Back: 150 mm - Front: 1000 mm
CO emission at 13% O2:
Follow assembly- and instructions manual.
Use only recommended fuels.
Montage- und Bedienungsanleitung beachten.
Verwenden Sie nur empfohlene Brennstoffe.
1000 01-2010
0,09% 1135 mg/Nm³
Schweiz
Germany
LRV 11
BStV 1
VKF N 17943
FSPS-Wa 1646-EN
RWE Power AG
RWE Power AG