To Next PageTo Next Page
Need help?Do you have a question about the SCAN 66 series and is the answer not in the manual?
General| Model | SCAN 66 series |
|---|---|
| Category | Stove |
| Fuel Type | Wood |
| Smoke Outlet Diameter | 150 mm |
| Max. log length | 30 cm |
Guidance on installing the stove safely and correctly as per regulations.
Key specifications, measurements, and performance data for the Scan 66 series.
Visual diagram with dimensions for the wall-mounted model.
Visual diagram with dimensions for the pedestal model.
Visual diagram with dimensions for the plinth model.
Visual diagram with dimensions for the S-Curve model.
Details on identification plates and product registration number.
Optional items that can enhance the stove's functionality.
List of specific accessories like glove, seal, and repair lacquer.
Guidelines for responsibly disposing of the stove's packaging materials.
Step-by-step guide to attach the base or wall fitting to the stove.
How to connect external air for the pedestal model (bottom or rear).
Instructions for mounting the Scan 66-4 Plinth model.
Guide for attaching the S-shaped base to the stove correctly.
Steps for opening and closing the stove door properly.
Detailed instructions for fitting the internal burn chamber plates.
Completing the burn chamber assembly and final checks before use.
Advice on optimal placement and safe distances from furniture.
Requirement for mounting the wall model on a non-combustible wall.
Approved method for storing wood near the Scan 66-5 S-Curve.
Safety clearances for uninsulated and insulated flue pipes.
Required distances from combustible walls and firewalls.
How to level and adjust the stove using its base screws.
Ensuring floor support and proper use of floor plates.
Connecting the stove to various chimney types and requirements.
Ensuring adequate air supply for combustion and using external air.
Warnings about improper operation like overloading or open doors/dampers.
Explanation of clean burning technology and air management.
Maintenance of internal components like baffle plates and ash drawer.
Proper techniques for starting and maintaining a fire.
Tips for using the stove in spring, autumn, and various weather.
Importance of chimney function and procedures for chimney fires.
Guidance on choosing, handling, and storing suitable firewood.
Importance of dry wood and comparison of fuel values.
List of materials that must not be burned in the stove.
Routine cleaning of surfaces, glass, and internal components.
Care for the lining, gaskets, and chimney sweeping.
Frequency and scope of professional maintenance for the stove.
Detailed steps for removing and servicing baffle plates.
How to fix issues where the stove door does not close properly.
Common causes and solutions for smoke escaping the stove.
Addressing issues causing wood to burn too quickly.
Causes and remedies for soot accumulation on the stove's glass.
Troubleshooting chimney soot and poor heating performance.
Explaining normal odors and surface changes during use.
Details on the 5-year warranty and how to make a claim.
Items and situations excluded from the warranty coverage.
Circumstances under which the stove's warranty becomes invalid.
