Need help?Do you have a question about the SCAN 83 series and is the answer not in the manual?
General| Material | Steel |
|---|---|
| Flue Outlet | Top or Rear |
| Flue Outlet Diameter | 150 mm |
| Type | Wood-burning stove |
| Heat Output (Minimum) | 3.0 kW |
Requirements for installing the stove according to national, local building regulations, and manual.
Essential safety guidelines for stove operation, handling, and modifications.
Detailed technical data including materials, dimensions, output, and efficiency.
Information displayed on the stove's identification type plate.
List of necessary tools and essential loose parts for assembling the stove.
Guidance on setting up and using the closed combustion system for airtight homes.
Instructions for connecting the stove to existing or prefabricated chimneys.
Specifications and requirements for the chimney and flue pipe for optimal performance.
Mandatory safety distances to furniture and general safety spacing.
Specific clearance requirements for flammable materials around the stove.
Procedure for adjusting the stove's height to ensure it is level and stable.
Guide for fitting the flue connection piece for both top and rear outlets.
Explanation of the Clean Burn technology for optimized combustion and reduced emissions.
Warnings and restrictions on operating the stove with the door or dampers open.
Tips for efficient, clean burning to minimize environmental impact and prevent soot.
Precautions to prevent damage from excessive heat development or over-firing.
Steps to take during a chimney fire and recommendations for prevention.
List of prohibited fuels that are hazardous to health and the stove.
Common causes and solutions for smoke escaping from the stove.
Addressing the causes of excessive soot accumulation within the chimney.
Situations and actions that will invalidate the stove's warranty.
To Next Page
