SCAN DSA 5 User Manual

1
Tested &
Listed by
Beaverton
Oregon USA
OMNI-Test Laboratories, Inc.
INSTRUCTIONS FOR
INSTALLATION AND USE
SCAN DSA 5
FREESTANDING STOVE
Save these instructions
May 2004
KROG IVERSEN & CO. A/S, DK-5492 VISSENBJERG, DENMARK

SCAN DSA 5 Specifications

General

Brand	SCAN
Model	DSA 5
Category	Stove
Language	English

Summary

1. INTRODUCTION

Safety and environment testing.

Details on safety and environmental testing performed on the Scan DSA 5 stove.

SAFETY PRECAUTIONS

Essential safety guidelines for operating and handling the Scan DSA 5 stove.

2. INSTALLATION

Pre Installation Check List:

A checklist to review before starting the installation of the Scan DSA 5 stove.

Specification

Technical information

Key technical specifications including output, room size, and weight for the Scan DSA 5 stove.

Floor Protection requirements:

Parallel installation:

Specific floor protection requirements for parallel stove placement.

Corner installation:

Specific floor protection requirements for corner stove placement.

Combustible Wall Clearance:

Non-Combustible Wall Clearances:

Clearance guidelines for non-combustible walls, considering the stove's convection system.

Chimney Installation:

Chimney height requirements:

Requirements for the vertical extension and total height of the chimney system.

Chimney Connection

3. OPERATION

Fueling the stove:

Guidance on selecting and preparing wood fuel for optimal stove performance.

Combustion Air Supply

Ensuring sufficient air supply for efficient combustion and proper chimney draft.

4. MAINTENANCE

Firebricks and baffle plate

Removing baffle plate for cleaning

Cleaning the glass panel

Replacement of door glass:

Dismounting/mounting of the door

Replacement of the steering axes/counterweights

6. TROUBLESHOOTING

Smoke:

The wood burns too fast:

Sootend glass:

Sootend chimney:

7. WARRANTY PROVISIONS