How to fix a Scandomestic Washer that does not start?
If your Scandomestic Washer isn't starting, make sure the door is completely closed and that no clothing is stuck preventing it from closing properly. Close the door correctly and restart the appliance. Also, check the laundry inside.
What to do if my Scandomestic WAH 1506 W Washer is leaking water?
If you notice water leakage from your Scandomestic Washer, the connections might not be tight enough. Check and tighten the water inlet pipe. Also, inspect and clean the outlet hose.
Why is my Scandomestic Washer making abnormal noises?
Abnormal noise in your Scandomestic Washer could be due to a couple of reasons. First, check to ensure that the fixing bolts have been removed. Second, make sure the appliance is installed on a solid and level floor.
What to do if the door of my Scandomestic Washer can't be opened?
If the door of your Scandomestic Washer won't open, it's possible that the safety protection is activated. To resolve this, disconnect the power and then restart the appliance.
What does 'Off Off Flash Off Off Off' error code mean on Scandomestic Washer, and how to fix it?
The error code 'Off Off Flash Off Off Off' on your Scandomestic Washer indicates a water injecting problem while washing. Check if the water pressure is too low, straighten the water pipe, and inspect whether the inlet valve filter is blocked.
What does 'Off Off Off Flash Off Off' error code mean on Scandomestic Washer, and how to resolve it?
The error code 'Off Off Off Flash Off Off' on a Scandomestic Washer indicates that the door is not closed properly. Restart the washer after ensuring the door is closed correctly. Check if any clothes are stuck, preventing proper closure.
How to remove detergent residues from the dispenser of my Scandomestic WAH 1506 W?
If you find detergent residues in the dispenser of your Scandomestic Washer, it's likely that the detergent is damp or clotted. Clean and wipe the detergent dispenser dry to resolve this issue.
What does 'Off Flash Off Off Off Off' error code mean on Scandomestic WAH 1506 W Washer, and how can I fix it?
The error code 'Off Flash Off Off Off Off' on your Scandomestic Washer means there is a water overflow. Restart the washer to resolve the issue.
What does 'Off Off Flash Flash Off Off' error code mean on a Scandomestic WAH 1506 W Washer?
The error code 'Off Off Flash Flash Off Off' on your Scandomestic Washer indicates overtime water draining. Check if the drain hose is blocked.
What to do if the indicator or display of my Scandomestic WAH 1506 W doesn't work?
If the indicator or display on your Scandomestic Washer isn't working, it could be due to connection problems with the PC board or harness. Switch off the power and check if the mains plug is connected properly.
General| Category | Washer |
|---|---|
| Model | WAH 1506 W |
| Color | White |
| Washing capacity | 6 kg |
| Capacity | 6 kg |
| Loading type | Front loading |
To Next Page
