What to do if my Scandomestic Washer has water leakage?
If you notice water leaking from your Scandomestic Washer, it's likely that the connection between the inlet pipe or outlet hose isn't tight. You should check and fasten the water pipes, and also clean the outlet hose to resolve this issue.
Why won't my Scandomestic Washer start?
If your Scandomestic Washer isn't starting, it could be that the door isn't closed properly. Make sure to close the door correctly and check if any clothes are stuck, then restart the washer.
What to do if Scandomestic Washer shows error code Off Off Flash Off Off Off?
If your Scandomestic Washer displays the error code Off Off Flash Off Off Off, it indicates a water injecting problem during washing. You should check if the water pressure is too low, straighten the water pipe, and inspect the inlet valve filter for any blockages.
What to do if Scandomestic WAH 1707 W shows error code Off Off Flash Flash Off Off?
If your Scandomestic Washer is showing the error code Off Off Flash Flash Off Off, this means there's overtime water draining. Check if the drain hose is blocked and clear any obstructions.
Why can't I open the door of my Scandomestic WAH 1707 W Washer?
If you're unable to open the door of your Scandomestic Washer, the washer's safety protection design might be active. To resolve this, disconnect the power to the washer and then restart the product.
What does it mean if Scandomestic WAH 1707 W shows error code Off Flash Off Off Off Off?
If your Scandomestic Washer displays the error code Off Flash Off Off Off Off, it indicates a water overflow issue. Restart the washer to resolve this problem.
What to do if my Scandomestic Washer shows error code Off Off Off Flash Off Off?
If your Scandomestic Washer shows the error code Off Off Off Flash Off Off, it could be that the door isn't closed properly. Make sure to close the door correctly and check if any clothes are stuck, then restart the washer.
How to fix abnormal noise in Scandomestic WAH 1707 W?
To address abnormal noise coming from your Scandomestic Washer: * Check if the fixing bolts have been removed. * Ensure the washer is installed on a solid and level floor.
Why is there detergent residue in my Scandomestic Washer's detergent box?
If you're finding detergent residue in the detergent box of your Scandomestic Washer, it's likely that the detergent has become dampened or agglomerated. Clean and wipe the detergent box to resolve this.
What to do if the indicator or display does not light up on my Scandomestic WAH 1707 W Washer?
If the indicator or display on your Scandomestic Washer isn't lighting up, check if the power is shut down and the power plug is connected correctly. It is possible, that the PC board or harness has connection problem.
General| Washing Capacity | 7 kg |
|---|---|
| Category | Washer |
| Model | WAH 1707 W |
| Energy Efficiency Class | A |
| Type | Front-loading |
To Next Page
