What to do if my Scandomestic WAH 3110 W Washer is leaking water?
If your Scandomestic Washer is leaking water, it's likely that the connection between the inlet pipe or outlet hose isn't tight. Check and fasten the water pipes, and also clean the outlet hose to resolve the issue.
How to fix Scandomestic WAH 3110 W Washer that won't start?
If your Scandomestic Washer won't start, the door might not be closed properly, or clothes might be stuck. Restart the washer after ensuring the door is fully closed and checking for any obstructions.
What to do if Scandomestic WAH 3110 W displays E10 error?
If your Scandomestic Washer is showing an E10 error, it indicates a water injecting problem. Check if the water pressure is too low, straighten the water pipe, and inspect the inlet valve filter for blockages.
What to do if Scandomestic Washer displays E30 error?
If your Scandomestic Washer displays an E30 error, it means the door isn't closed properly. Restart the washer after ensuring the door is closed correctly and checking for any clothes stuck in the door.
Why is there abnormal noise coming from my Scandomestic Washer?
If there's abnormal noise coming from your Scandomestic Washer, check if the fixing bolts have been removed. Also, ensure the washer is installed on a solid and level floor.
What to do if Scandomestic Washer displays E21 error?
If your Scandomestic Washer shows an E21 error, it means there's overtime water draining. Check the drain hose to see if it is blocked.
What to do if Scandomestic WAH 3110 W displays E12 error?
If your Scandomestic Washer displays the E12 error, it indicates a water overflow. Restart the washer to resolve the issue.
Why is there detergent residue in the Scandomestic WAH 3110 W box?
If you find detergent residue in the Scandomestic Washer box, it's likely because the detergent is dampened or has agglomerated. Clean and wipe the detergent box to fix this.
What to do if I can't open the door of my Scandomestic WAH 3110 W Washer?
If you can't open the door of your Scandomestic Washer, the washer's safety protection design is likely activated. Disconnect the power and then restart the product.
Why is the indicator light off on my Scandomestic WAH 3110 W?
If the indicator or display on your Scandomestic Washer isn't lighting up, it could be due to a power disconnection, or a problem with the PC board or harness connection. Check if the power is shut down and ensure the power plug is correctly connected.
Packaging material can be dangerous for children and pose a suffocation risk.
Information on the disposal of EEE waste according to WEEE directives.
Information on risks associated with electrical connections and damaged cords.
Safety precautions for children interacting with the appliance.
Warnings against washing flammable or explosive substances.
Guidelines for selecting a stable, suitable location for the washing machine.
Instructions for safely removing packaging materials from the appliance.
Steps to remove transport bolts before first use.
Instructions for connecting the water inlet hose to prevent leaks.
Check garment labels and detergent instructions before washing.
Ensure pockets are emptied of items before starting the wash.
Instructions for cleaning the detergent dispenser drawer and its parts.
List of error codes, their causes, and solutions for common issues.
Overview of the washing machine's control panel and its buttons.
Explanation of the washing machine's display symbols and indicators.
List of included accessories with the washing machine.
How to set and cancel the delay start function for washing cycles.
Using the pre-wash function for extra cleaning before the main wash.
How to add laundry mid-cycle if needed.
How to adjust washing temperature and spin speed for cycles.
Instructions for cleaning the washing machine's outer casing.
Instructions for cleaning the inside of the washing machine drum.
How to clean the door seal and glass after each wash.
How to clean the inlet filter to ensure adequate water supply.
Instructions for cleaning the drain pump filter.
Troubleshooting guide for common error codes and issues.
How to activate and deactivate the child lock feature to prevent misuse.
Instructions for turning the audible buzzer on or off.
Suitable for cotton, linen, and synthetic articles like shirts and coats.
High-temperature wash for hygiene and a specific cycle for jeans.
Includes programmes like Delicate, Wool, Sportswear, and quick wash options.
General| Door color | Black |
|---|---|
| Door hinge | Left |
| Cord length | 1.5 m |
| Drum volume | 70 L |
| Control type | Rotary, Touch |
| Loading type | Front-load |
| Drum material | Stainless steel |
| Product color | White |
| Built-in display | Yes |
| Reversible doors | No |
| Inlet hose length | 1 m |
| Outlet hose length | 1.6 m |
| Appliance placement | Freestanding |
| Current | 10 A |
| Connected load | 1950 W |
| AC input voltage | 220 - 230 V |
| AC input frequency | 50 Hz |
| Energy efficiency scale | A to G |
| Power consumption (off) | 0.5 W |
| Power consumption (standby) | 1 W |
| Water consumption per cycle | 52 L |
| Energy consumption washing per cycle | 0.5 kWh |
| Drum capacity | 10 kg |
| Cycle time (max) | 239 min |
| Residual moisture | 53 % |
| Maximum spin speed | 1500 RPM |
| Noise level (spin) | 80 dB |
| Noise level (wash) | - dB |
| Foam control system | - |
| Number of washing programs | 16 |
| Maximum washing temperature | 90 °C |
| Package depth | 695 mm |
| Package width | 680 mm |
| Package height | 875 mm |
| Package weight | 76000 g |
Weight and Dimensions| Depth | 565 mm |
|---|---|
| Width | 595 mm |
| Height | 850 mm |
| Weight | 72000 g |
| Door diameter | 480 mm |
To Next Page
