Need help?Do you have a question about the SCANMASKIN Scan Combiflex 800 and is the answer not in the manual?
Details electrical requirements, voltage, current, fuses, and power inlet types for the machine.
Outlines essential safety measures, PPE, and work area checks before operation.
Details responsibilities, personnel training, work practices, and spare parts requirements.
Specifies requirements for trained personnel to operate or service the machine.
Emphasizes using recognized procedures, ensuring safety devices are functional, and checking for damage.
Covers power source requirements, cable ratings, protective earth, and electrical work safety.
Outlines generator requirements for protective earth and compliance with VDE directives.
Defines the safe condition and steps to achieve it for maintenance and preventing unintended restart.
Specifies setting the machine to 'Safety off', avoiding work with power connected, and handling hot parts.
Provides step-by-step instructions for safely starting the Scan Combiflex 800 machine.
Details the procedure for safely stopping the machine and its components.
Introduces troubleshooting, covering common faults, their causes, and corrections.
Details specific error codes, their causes, and required actions by different personnel roles.
General| Motor Power | 7.5 kW |
|---|---|
| Working Width | 800 mm |
| Dust Extraction | Yes |
| Voltage | 400 V |
| Grinding Width | 800 mm |
| Power | 7.5 kW |
| Frequency | 50 Hz |
| Planetary heads | 3 |
To Next Page
