Scansonic DA310 - Safety Warnings; Damage Precautions; Unit Placement Guidelines; Naked Flame Warning

2
Safety warnings
• Read all the instructions carefully before using the unit and keep them
for future reference.
• Retain the manual. If you pass the unit onto a third party make sure to
include this manual.
• Check that the voltage marked on the rating label matches your mains
voltage.
Damage
• Please inspect the unit for damage after unpacking.
• Do not continue to operate the unit if you are in any doubt about it work-
ing normally, or if it is damaged in any way – switch off, unplug from the
mains socket and consult your dealer.
Location of Unit
• Theunitmustbeonaatstablesurfaceandshouldnotbesubjectedto
vibrations.
• Do not place the unit on sloped or unstable surfaces as the unit may fall
off or tip over.
• The mains socket must be located near the unit and should be easily
accessible.
• This unit is designed for indoor use only.
Temperature
• Avoid extreme degrees of temperature, either hot or cold. Place the unit
wellawayfromheatsourcessuchasradiatorsorgas/elctricres.
• Avoid exposure to direct sunlight and other sources of heat.
Naked Flames
• Neverplaceanytypeofcandleornakedameonthetopornearthe
unit.
Moisture
• Toreducetheriskofre,electricshockorproductdamage,donot
exposethisunittorain,moisture,drippingorsplashing.Noobjectslled
with liquids, such as vases, should be placed on the unit.
• If you spill any liquid into the unit, it can cause serious damage. Switch it
off at the mains immediately. Withdraw the mains plug and consult your
dealer.
Ventilation
• Topreventtheriskofelectricshockorrehazardduetgooverheating,