EU declaration of conformity
hereby declares that
Scantool DRILL PRESS 16A are manufactured in accordance with the
provisions of the COUNCIL DIRECTIVE of 17. May 2006 (2006/42/EC) – The
Machinery Directive (order no. 561 of 25 June 1994 with subsequent
amendments)
Also on accordance with:
• The council directive of 19 February 1973 (73/23/EEC) – The Low
Voltage Directive – with later amendments (order no. 797 of 30 August
1994)
• The council directive of 3 May 1989 (89/336/EEC) – The EMC Directive
– with later amendments (order no. 796 of 5 December 1991 with
subsequent amendments)
SCANTOOL A/S
Industrivej 3-9
9460 Brovst
Denmark
Website: www.scantool-group.dk
Ph.: +45 98 23 60 88
Fax.: +45 98 23 61 44
To Next Page
Loading...
