Show: This function permits to allow the machine in “free service”, but only for
Non-Dangerous fishes. Activated on “ON”, deactivated on “OFF”.
To deactivate this function, the password required is: “4321”.
Length of water deployment: by default the programs have a pre-defined value
for each fish which you will activate in « Auto ». If you wish to modify these
values you can personally select the distance. Warning, the initial values differ
for each fish selected, whereas the manually chosen selection is applied to all
fish. Depending on the fish chosen, too small a value can make the combat
very quick, and not very interesting.
When you have selected your parameters, validate your choice by pressing
the key « OK ».
You can return to this page at any time to modify one or more parameters.
Languages mode:
This page simply allows you to activate the language in which you wish to use the
simulator.
To Next Page
Loading...