R
Robert WilsonAug 28, 2025
How to adjust brightness on Sceptre U500CV-UMK?
- DDouglas LoveAug 28, 2025
If the picture on your Sceptre UHD TV is too dark, adjust your contrast, brightness, and lamp settings from the OSD Menu.
To Next PageTo Next PageHow to adjust brightness on Sceptre U500CV-UMK?
If the picture on your Sceptre UHD TV is too dark, adjust your contrast, brightness, and lamp settings from the OSD Menu.
How to fix Sceptre U500CV-UMK not receiving enough channels?
If your Sceptre UHD TV cannot receive sufficient channels through the ATSC/NTSC tuner, change the direction of your antenna and rescan your channels. If you have cable call up your cable company and ask about signal strength of your local cable.
Why does my Sceptre U500CV-UMK have audio but no picture?
If you're getting audio but no picture on your Sceptre UHD TV, make sure both your video and audio cables are correctly connected. Also, the TV’s tuner signal must not be lower than 65 %.
What to do if Sceptre U500CV-UMK UHD TV has picture but no audio?
If your Sceptre UHD TV shows a picture but has no sound, check that the audio cable is connected properly. Also, try readjusting the volume using the remote control. Ensure that the TV’s tuner signal is not lower than 65 %.
Why does my Sceptre UHD TV remote control not work?
If the remote control for your Sceptre UHD TV isn't working, try these steps: Turn off the TV and unplug it. Remove the batteries from the remote for 30 seconds, then press the remote buttons and the power button randomly for about 2 seconds before reinstalling the batteries. Also, ensure there's a clear line of sight between the remote's front sensor and the TV's remote sensor, which is located in the same place as the power indicator light.
General
