What does error E1 mean on Schartec Garage Door Opener?
If the display on your Schartec Garage Door Opener shows E1 and the opener isn't working, check the connection between the main hall sensor and the PCBA.
What does error E2 mean on Schartec Move 1000?
If the display on your Schartec Garage Door Opener shows E2 and the opener isn't working, check the connection between the sub-hall sensor and the PCBA.
General| Manufacturer | Schartec |
|---|---|
| Type | Garage Door Opener |
| Model | Move 1000 |
| Max. door weight | 100 kg |
| Max. force | 1000 N |
| Motor Type | DC Motor |
| Noise Level | 60 dB |
| Remote Control | Yes, included |
| Warranty | 2 years |
| Max. door height | 2500 mm |
| Speed | 16 cm/s |
| Safety Sensors | Yes |
| Manual Operation | Yes, via emergency release |
Specifies the required expertise for safe installation and maintenance of the opener.
Critical warnings and procedures for handling the door system and its components.
Essential checks for the garage door's condition and balance before opener installation.
How to set the desired open and closed positions for the garage door.
Process for pairing and registering remote controls with the garage door opener.
How to adjust the force sensitivity for safe door operation and obstruction detection.
To Next Page
