1. Automatic safety reverse
Automatic stop / automatic reverse are controlled by the software on our circuit boards. We are
cautious to protect your children, pets and property.
2. Soft start / Soft stop
Gently ramping speed up and down at the start and end of each cycle reduces stress on the door
and opener, and makes for longer life and quieter operation.
3. Auto-Close
Auto-Close ensures peace of mind and keeps your house secure by automatically closing the door after
entering or exiting the garage.
4. Self learning - open and close obstruction force
Teaching in the open and close limits of your garage door is simple with the self-learning function. The
opener force measurement is automatically adjusted to a suitable range.
5. Simple adjustment of the end positions
Setting the end positions is easily done by pressing a button on the display panel.
6. Terminals for Accessories
Terminals are available for photocells (safety beam) extra receivers, wired or wireless wall switches,
caution/warning lights and more.
7. Energy saving LED
The courtesy LED light has a 3 minute delay, switching on with each cycle to illuminate your darkened
garage.
8. Self-Lock in gear motors
Schartec gear motors will self-lock with our disengagement systems.
9. Manual release
Don't worry about power failure, the manual release system is a solution for operation the door at any
time.
10. Transmitter technology
Rolling-Code technology (7.38 x 1019 Combinations), 433.92 MHz frequency, 4 channel remote control
design ensures that you can control 4 different Force motors with one transmitter.
11. Lower headroom
With as little as 30mm required between the ceiling and the highest point of the door travel, the opener
can be flush mounted for low headroom applications.
12. Metal bottom plate, stronger and more secure
13. Open/Stop/Close - button (A)
Front panel open / stop / close buttons for operation. (see below)
14. External mains power fuse (B) (see below)
To Next Page
Loading...