Schaudt LRM 1218 User Manual

Operating Instructions for Solar Charge Regulato r LRM 1218
8
Date: 22.07.2015 822.0213 BA / EN
Appendix
A EC Declaration of Conformity
Schaudt GmbH hereby confirms that the design of the LRM 1218 solar char-
ger regulator complies with the following relevant regulations:
The original CE declaration of conformity is available for reference at any
time.
Schaudt GmbH, Elektrotechnik & Apparatebau
Daimlerstraße 5
88677 Markdorf
Germany
B Special fittin g s/accesso ries
LT 320 instrument panel for connection to systems without a direct solar cur-
rent display by the control panel
TF 50 A battery sensor to read the battery temperature -- is read automati-
cally and has a bearing on the charging characteristics
C Fault report
In the event of damage, please fill in the fault report and send it with the
faulty device to the manufacturer .
Device type: _______________________
Item no.: _______________________
Vehicle: Manufacturer: _______________________
Model: _______________________
Own installation? Yes
- No -
Upgrade? Yes - No -
Following fault has occurred (please tick):
- Battery is not charged when solar modules are connected
- Persistent fault
- Intermittent fault/loose contact
Other comments:
Manufacturer
Address
Panel
Battery temperature
sensor

Schaudt LRM 1218 Specifications

General

Brand	Schaudt
Model	LRM 1218
Category	Controller
Language	English